欢迎进入深圳市汉斯福特科技有限公司网站!
13352927502
产品中心

Product Center

当前位置:首页  -  产品中心  -    -  转速计  -  DT-5TS转速表
DT-5TS转速表
产品简介

TheShimpoDT-5TSeconomicalpanelindicatorisidealforspeedandprocesstimemonitoringwhencombinedwithacompatiblein-linesensor

产品型号:
更新时间:2024-06-26
厂商性质:代理商
访问量:113
详细介绍在线留言

The Shimpo DT-5TS economical panel indicator is ideal for speed and process time monitoring when combined with a compatible in-line sensor. Loaded with features found in more expensive units, the DT-5TS panel indicator is extremely versatile with selectable inputs.

 

The DT-5TS is fully scalable and possesses three selectable modes allowing it to measure and display RPM/linear speed/rate, elapsed time and process time. Each panel indicator accepts a variety of signal inputs from any sensor providing an NPN, contact, sine wave, or square wave such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors and NPN OC transistors. Typical applications can range from machine operation timing, rate of change monitoring such as on a conveyor, elapsed time of oven curing etc. with any variety of compatible sensor inputs desired.


  • Highly accurate (± 0.008% ± 1 digit) makes ideal for process control and analysis

  • Large 6 digit LED display plus two smaller 6 digit secondary displays allow easy viewing from greater distances

  • Scalable programming gives user the flexibility to set up and monitor virtually any process

  • Selectable update time allows operator to speed up/slow down display changes to facilitate process

  • Wide range power voltage (85 – 264VAC, 50/60Hz) eliminates need for having to purchase and wire an additional power transformer

  • Great versatility with multiple sensor input capability in one unit: NPN open collector, contact and square or sine wave sensor inputs.

  • Front cover protection eliminates accidental bumping of keypad to incorrect program

  • IP66 front cover protection keeps water out, enables usage in compatible plant wash-down operations

  • DC power source output to power compatible sensors saves money by eliminating need for separate power supply

  • Selectable decimal point enables higher resolution display potential

  • 1/8 DIN size panel cut out permits easy, industry-standard mounting

 


Model

DT-5TS

Measuring Range

10 – 99,999 rpm (at 1 p/r)

0.2 – 30,000 rpm (at 60 p/r)

Display Range

Tachometer/Rate Meter: 0 – 999999 with   selectable decimal point

Elapsed Time: 0:00:00 – 9:59:59 or 0.00-   999.99 sec

Process Time: 0:00:00 – 0:59:59 or 0.00 –   999.99 sec

Scalable

Yes (with outputs, see modules)

Accuracy

± 0.008 % ± 1 digit

Display Update Time

0.2, 0.5, 1, 2, 5, 10, 15, 30, 60 seconds   (selectable)

Input No. of P/R

1 to 9,999 (programmable)

Input Signal Characteristics

NPN open collector input: max. frequency   100 kHz / Contact input: max. frequency 20 Hz / Square wave input: max.   frequency 30 kHz – Sine wave input (magnetic pickup): max. frequency 10 kHz

Sensor Power Supply

12 VDC (150 mA)

Power Requirement

85 – 264 VAC (50/60 Hz) Optional (9 – 35 VDC   at 1 W also available)

Ambient Temperature

32°-113° F (0-45° C)

Dimensions

5.27" x 3.78" x 1.89" (134 x 96 x 48   mm)

Product Weight

0.66 lb (300 g)

Package Weight

0.65 lb (295 g)

Warranty

2-Year

Included Accessories

Mounting adapters and mounting screws,   decal sheet


订货型号

DT-5TS

Panel Indicator with selectable inputs,   100-240 VAC Power

DT-5TS-DC

Panel Indicator with selectable inputs,   9-35 VDC Power

 

配件

Proximity Sensors

BI2-S12

NPN (NO) sinking output 1.5 kHz   frequency, LED indication, 6.5′ (2 m) cable, 0.08″ (2 mm) sensing distance,   NEMA 6 (IP67) rating

DJ2-G

NAMUR output, 3 kHz frequency,   zero-sensing capability, 6.5′ (2 m) cable, 0.08″ (2mm) sensing distance, NEMA   6 (IP67) rating

MCS-3109

NPN (NO,NC) output, 300 Hz frequency,   0.32″ (8 mm) sensing distance, 6.5′ (2 m) cable, NEMA 6 (IP67) rating, for   use in high vibration areas

SE-G

Square wave output, 8 kHz frequency, LED   indication, 18″ (0.46 m) cable, 0.04″ (1 mm) sensing distance

Retro-Reflective Photo Sensors

MCS-625

Photo sensor with NPN sinking output, 250   Hz activating frequency, 10′ (3 m) cable 1″ to 3′ (25 to 914 mm) operating   range

MCS-655

Photo sensor with NPN sinking output, 333   Hz activating frequency, LED status, 10′ (3 m) cable, NEMA 4 (IP65), 1″ to 3′   (25 to 914 mm) operating range for light or dark activation.

LS-S50MLR

Laser sensor with NPN/PNP (NO,NC)   outputs, 1.5 kHz frequency, LED indication, 6′ (1.8 m) with quick disconnect   connection, NEMA 6 (IP67) rating

Rotary Pulse Generators

RE1B-60F

Rotary encoder in ABS housing with 60 ppr   digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable

RE1B-600F

Rotary encoder in ABS housing with 600   ppr digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable

RE1B-1000F

Rotary encoder in ABS housing with 1000   ppr digital output, maximum speed 5000 rpm, 1.7 ft (0.5 m) cable

RE2B-30F

Quadrature rotary encoder in ABS housing   with Dual (90° out of phase) 30 ppr digital output, maximum speed: 5000 rpm,   1.7 ft (0.5 m) cable

RE2B-600F

Quadrature rotary encoder in ABS housing   with Dual (90° out of phase) 600 ppr digital output, maximum speed: 5000 rpm,   1.7 ft (0.5 m) cable

FPM-RE1B

12″ circumference wheel for use with RE1B   and RE2B pulse generators

Magentic Pick-up Sensors

MP-10

Sine wave output from change in magnetic   to non-magnetic, change in voltage proportional to magnetic flux intensity   over time, range of 0.01″ (0.25 mm) typical clearance, 10′ (3 m) cable

3030AN

Sine wave output from change in magnetic   to non-magnetic, change in voltage proportional to magnetic flux intensity   over time, range of 0.01″ (0.25 mm) typical clearance, Amphenol connector

CABLE-3030

Optional cable for 3030AN

3070-XP12010

Sine wave output from change in magnetic   to non-magnetic, change in voltage proportional to magnetic flux intensity   over time, range of 0.01″ (0.25 mm) typical clearance, 10′ (3 m) cable   Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3

Slot Type Sensor

CM-SR21

For less dense materials that allows beam   to penetrate through, NPN or PNP output with a 0.08″ (2 mm) gap range, NEMA   4x (IP65) housing.

CBL-75ANL

Optional cable for CM-SR21 16.4′ (5 m)


相关型号

DT-5TXR

DT-601CG


DT-5TS 01.png

在线留言

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

相关文章

RELATED ARTICLES

TEL:0755-26552352

扫码加微信