扭力螺丝刀紧固件的联结质量直接影响到各种仪器仪表、机电设备、家用电器等产品的使用质量至这些产品的可靠程度。所以扭力螺丝刀等扭力工具在工业生产中也逐渐被使用的越来越多了。
扭力螺丝刀用于检测已固定在物体上的螺丝或螺帽的松紧程度,测量螺丝或螺帽旋入或旋出时的扭力。有跟随模式,实时模式和峰值保持模式,测量正反方向扭力。
2 Models
DID-05: Capacity: 4.500 lb-in / 50.00 N-cm
DID-4A:Capacity: 35.00 lb-in / 400.0 N-cm
The DID is a torque measuring manual screwdriver designed for lab and production use. The large LCD display measures bi-directional torque in real-time or peak modes. USB data output allows the user to graph torque vs time with optional SW-1SD software.
The DID has an accuracy of ± 0.5% F.S., ±1 LSD and has programmable setpoints that provide both an audible beep and green/red LED indicator for uniform tightening or GO/NO GO testing. In addition, it features a programmable counter that minimizes assembly errors by identifying mis-tightening and/or defective screws. Optional ratcheting clutch allows for convenient tightening or loosening. Use the 800 internal memory for data recall or USB download for SPC.
The DID substantially reduces scrap and rework costs by eliminating over and under-tightening and is ideal for use in a wide variety of applications including the manufacture of electronic, appliance and aerospace assemblies.
Includes NIST Traceable Calibration Certificate, ISO-17025 Cert Optional
Peak, Real Time and Peak Down measuring mode (selectable)
Statistics: number of data, Max, Min, Avg
Programmable screw tightening counter
DID-4 uses standard 1/4" bits, DID-05 uses 4mm hex bits.
Selectable units ozf-in, lbf-in, kgf-cm, N-cm and N-m
Runs on internal NiCad batteries (8 hour use) Auto shut-off after 10 min. of non-use
Programmable High and Low set points with both audible beep and Green/Red LED indicator for uniform torque tightening or GO/NO GO testing
USB virtual COM port sends peak (1 data) or continuous data (12 or 180 data/second)
800 data memory for recall or for SPC download
Programmable Auto Zero function resets unit to zero for easy operation
2 Phillips tips, AC charger and carrying case included
2-Year Warranty
Accuracy | +/- 0.5% F.S., +/- 1 LSD |
Display | 4 digit LCD |
Operation | CW, CCW and fixed position (DID-4 Only) |
Measuring Modes | |
PP | Peak Mode displays PEAK torque value that will not change until a higher value is measured |
PD | Peak Down Mode Captures first peak down value above the PDLO |
Real Time | Displays transient torque values |
C | Real-time Output 180 data per second |
GO/NO GO testing | Programmable High and Low setpoints with both audible beep and Green/Red LED indicator |
Statistics | Number of data, maximum, minimum and average |
Data Transfer | ASCII, 19200 bps, USB miniB cable |
Data Memory | 800 data |
Batch Counter | 1-99 (CW only) |
Power Supply | Ni-Cad rechargeable batteries 1.2V×4cells 600mAh |
Auto Power Save | Automatic switch off after 10 minutes of non-use |
Charging Time | From empty - less than 5hours |
Working Time | 12 hours continuous use |
Accessories | AC/DC Adapter/Charger, 100~230VAC, 2 Phillips bits, NIST certificate |
Warranty | 2-Years |
订货型号
DID-4A | Digital Torque Screwdriver, 35 lb-in / 4Nm Capacity |
DID-4A-ISO | Digital Torque Screwdriver, 35 lb-in / 4Nm Capacity with ISO-17025 Calibration Cert |
DID-05 | Digital Torque Screwdriver, 4.5 lb-in / 50 N-cm Capacity |
DID-05-ISO | Digital Torque Screwdriver, 4.5 lb-in / 50 N-cm Capacity with ISO-17025 Calibration Cert |
配件
SW-1SV-USB | Data Acquisition Software for DID-4 Torque Screwdriver |
SS-209 | USB Output Cable for DID Torque Screwdriver |
3A-066WP12-120 | Spare / Replacement Power Adapter from DID-4 |
RA2 | Ratchet Clutch for use with DID-4A Torque Screwdriver |
相关型号
TSD 扭力螺丝刀起子
GLK 数显螺丝刀
TT03 数字式扭矩仪
SW-1SV-USB 扭力值数据采集软件