欢迎进入深圳市汉斯福特科技有限公司网站!
13352927502
产品中心

Product Center

当前位置:首页  -  产品中心  -    -  张力计  -  CBM 钢索拉力计
CBM 钢索拉力计
产品简介

张力仪是测量丝网受到拉力作用时其内部与固定丝网接触体之间的相互牵引力大小的仪器

产品型号:
更新时间:2024-06-26
厂商性质:代理商
访问量:67
详细介绍在线留言

张力仪是测量丝网受到拉力作用时其内部与固定丝网接触体之间的相互牵引力大小的仪器。张力仪有机械式和电子式两种,测量张力的单位用牛顿/厘米表示。张力也可以用相对数值来表示。厘米张力仪就是用相对数值表示张力的一种,是通过张力仪自身重量使丝网下沉的深度的数值(毫米)来计算,张力数值可从指示盘上直接得到,或者从控制盘上间接得到。张力仪有手工操作和机械操作两种。张力仪是检验丝网印版质量的重要的检测仪器。为保证得到制版要求的张力,在绷网过程中或绷网后都要使用张力仪测量。

 

德国Honigmann专注于卷材张力检测和张力控制有超过60年历史,是大张力测量仪表生产商。旗下产品有钢索电缆张力计CBM适用于钢索合成电缆,裸露或者绝缘电缆的张力检测。

For material diameters: 7 Models up to 46 mm Diameter (up to 1-3/4")

Capacities up to 20,000 Kg (44,000lbs or 200kN)

The new Cable Bull Honigmann CBM Cable Tension Meter is a new innovative solution for hand-held portable tension measurement. The unique design allows for measurement of any material diameter between 1 up to 46 mm without custom programming or setup. Suitable for use on all types of materials including wire rope, synthetic cable, bare or insulated wires.

 

Honigmann CBM Designed for measuring wires & cables that are anchored/fixed at both ends (closed system) as well as running lines. Also commonly used on Kevlar, fiberglass and other hi-strength materials when used in a similar applications. This CBM can also be considered a Rope Tension Meter designed to measure the static tension in wire ropes, cables, guy wires, belts, ...

 

Applications include guy wires, support cables, tethers, elevator load measuring, tension equalization in elevator ropes, rope sets, service lifts inside wind turbine systems, tensioning, protecting cranes and hoists from overload, tension measurement in stay ropes / cables, suspension ropes and railway catenary ropes, vehicle pull test, for safe loading in material handling, load securing control, tension control of lashing straps, equalize loadings on multi-cable assemblies, and much more.


  • No calibration or programming required for specific cable diameter or wire construction

  • Sophisticated roller geometry allows the CBM to measure with an error of less than 1%.

  • Choice of "front side" or "rear side" position of Lever-Lock mechanism which opens and closes the measuring system

  • High precision fabrication from Stainless Steel and Aluminum for trouble-free use even in the toughest in-field applications

  • Connects to lightweight, battery-powered tension indicator for maximum portability and ease of use

  • Can be used on cable diameters below and above specified range with only small additional inaccuracy


Accuracy

± 1% Full Scale or better

Outer Roller   Spacing (c:c)

600 mm or 800mm

Wrap Angle

3 Degrees

Additional   Length Effect

0.12 mm

Guide Rollers

V-Grooved Aluminum 47/21 mm (OD/Root   Diameter)

Roller Material

Hardened Steel

Overload   Protection

200% +

Calibration   Certificate

Optional


订货型号

CBM-SR8 for samples diameters 1 up to 8 mm

CBM-SR12 for sample diameters 4 up to 12mm

CBM-SR16 for sample diameters 8 up to 16 mm

CBM-SR22 for sample diameters 14 up to 22 mm

CBM-SR30 for sample diameters 20 up to 30 mm

CBM-SR38 for sample diameters 28 up to 38 mm

CBM-SR46 for sample diameters 36 up to 46 mm


相关型号

DMS485  Handheld Amplifier 


上一个:CTM2

返回列表

下一个:BTM-TTC 皮带张力计

在线留言

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

产品分类

PRODUCT CLASSIFICATION

相关文章

RELATED ARTICLES

TEL:0755-26552352

扫码加微信