Our Transducer Techniques SWS Series reaction type socket wrench torque sensors are available in ranges from
10 ft-lbs. through 1000 ft-lbs. and provide accurate measurements of bolt or nut wrenching torques.
我们的SWS反作用力型套筒扳手式扭矩传感器所测量程为10ft-lbs到1000ft-lbs,能够精准测量螺栓或者螺母扭力矩。
These sensors transducer SWS are bi-directional so both tightening and break-away torques can be measured. These low cost sensors deliver high accuracy and outstanding frequency response. Calibration of mechanical torque wrenches may be performed with this sensor. The sensing element incorporates bonded foil strain gages of the highest quality.
作为一款经济型传感器,SWS精度高,频率响应突出,可双向同时测量拧紧力矩和断离力矩。可对传感器进行机械力矩扳手校准。传感器内置应变计。
详情请联系我们
额定输出 | 2.0 mV/V nominal |
非线性 | 0.2% of R.O. |
磁滞 | 0.2% of R.O. |
不可重复性 | 0.1% of R.O. |
零点平衡 | 1.0% of R.O. |
补偿温度范围 | 60° to 160°F (60℃-71℃) |
安全温度范围 | -65° to 200°F (-54℃- 93℃) |
灵敏度温漂 | 0.005% of Load/°F |
零点温漂 | 0.01% of R.O./°F |
终端电阻 | 350 ohms nominal |
激励电压 | 10 VDC |
安全载荷 | 150% of R.O. |
订货型号
型号 | 量程 (ft-lb) | 驱动类型 | A | B | C | D |
SWS-10 | 10 | 1/4 | 2.063 | 1.312 | 0.375 | 0.625 |
SWS-20 | 20 | 1/4 | 2.063 | 1.312 | 0.375 | 0.625 |
SWS-50 | 50 | 3/8 | 2.312 | 1.312 | 0.500 | 0.875 |
SWS-100 | 100 | 3/8 | 2.350 | 1.312 | 0.500 | 0.875 |
SWS-250 | 250 | 1/2 | 2.625 | 1.500 | 0.688 | 1.125 |
SWS-600 | 600 | 3/4 | 3.938 | 2.000 | 1.063 | 1.625 |
SWS-1K | 1000 | 1.0 | 4.375 | 1.875 | 1.125 | 2.500 |
配件
CAL-TEDS Plug & Play Option with Connector
相关扭矩传感器型号
RTS
TRS
TRT
STS
RST
RSS